Posted on

Coast Guard Certified Tri-color and Anchor Lights

The products on this page are U.S. Coast Guard certified.

 (For less expensive navigation lights, please click here [once we get the page built] for non-USCG certified lights.)

 

Stecktronics Tri-Color and Anchor Lights

This new Stecktronics product is manufactured in the Florida Keys. All parts are precision cut on

LED tricolor, LED masyhead, LED anchor/tricolor, led nav light
Tri 40

an automated CNC router. The case material is marine grade polymer and the lens is 1/8″ polycarbonate. All fasteners are marine grade stainless and its watertight integrity is accomplished with 13 mechanically compressed O-rings and a waterproof cable grip.  Incredibly low current draw, only 100ma (0.1 amps) in the lower anchor light section. Current draw for the upper tri-light section is just 185ma (0.18 amps). This is approximately 1/10th the current draw of a traditional incandescent fixture.

One great feature of this light is that any part of it can be replaced, and that includes any of the LED wafers or control boards. In the unlikely event something goes wrong, Stecktronics believes that it is very important that their lights can be fixed, as opposed to a light that is a sealed unit.

Two-Wire vs Three-Wire:
If you already have three wires running up the mast and have separate switches for navigation and anchor lights, then a three-wire system will work for you.

If you only have two wires running up the mast and have an existing anchor light switch; then a two-wire system is what you need. An exclusive Stecktronics micro-controller will remember how many times you turned your existing anchor light switch on and off and turn on either the anchor light or the tri-color light. All this with no extra wiring. Your existing switch will do it all! Full switch count features and instructions are available in the documentation listed below.

Three Wire Version Tri-color/Anchor  DATA  $395    BUY NOW

Quick Reference Guide for the Three-Wire model

Two Wire Tri-color/Anchor  DATA   $419    BUY NOW

Quick Reference Guide for the Two-Wire model

Three Wire System Without Auto On/Off and Flashing Features

DATA   $355    BUY NOW

Specifications

100ma (0.1amp) draw for lower anchor light
185ma (0.18amp) draw for the tri-light
Operating voltage range 11.6 thru 16 volts
Measurements and Fittings
3-1/4″ Diameter x 8-7/8″ High (on a 1-1/2″ stem) (also available with Low Profile Base, no stem)
Custom stem heights up to 12″ available
Fits mounting bolt pattern of Aquasignal? Series 40 Tri-Color and Anchor lights

USCG APPOVED ANCHOR LIGHTS

USCG Certified! Manufactured entirely in Marathon, Florida. This is one tough long-lasting light. Add a control wafer for On-At-Dusk–Off-At-Dawn control.

STM 4000 Stem Base
STM 4000 Stem Base

 

STM 4000 Low Profile
STM 4000 Low Profile

LED Anchor Light with On-At-Dusk – Off-At-Dawn Control Wafer  $160    BUY NOW

Basic LED Anchor Light Without the Control Wafer   $120   BUY NOW

Specifications
100ma (0.1amp) draw
Operating voltage range 11.6 thru 16 volts
Measurements and Fittings
3-1/4″ Diameter x 4-5/8″ High (on a 1-1/2″ stem) (also available on low profile base, no stem)
Custom stem heights up to 12″ available ($6.00 )
Fits mounting bolt pattern of Aquasignal? Series 40 Tri-Color and Anchor lights
Posted on

OGM

OGM LED Navigation and Anchor Lights – Now part of Misea Group
OGM LED Running Lights
Introducing a complete line of Coast Guard approved, low power, rugged LED navigation lighting for power and sail boats up to 50 meters (165 ft) in length. An included mounting bracket is provided for the red or green navigation lights; no bracket is required for the stern light.

OGM has re-engineered its LED navigation lights to include waterproof connectors. This is of tremendous value to trailer-sailors who must disconnect cabling to their masthead and anchor lights every time they trailer their boat. It is also important to northern sailors who haul out each winter.

It is less important to southern sailors who rarely de-step their mast, but the waterproof connector prevents condensation in the fixture and wiring.

LED Port (Red) Running Light
SKU: LX2-PT
LED Port Running (red) Light for sail and power boats up to 164 ft. Low power, Rugged, Waterproof, Long Life. Built for the military, but available at a reasonable price for any mariner.
$189.00  BUY NOW

Running Light

LED Starboard Running (green) Light for power and sail boats up to 164ft Low power, rugged, waterproof, long life.
$189.00   BUY NOW

Stern Light

SKU: LX2-ST
LED white stern light for power and sail boats up to 164ft Low power, rugged, waterproof, long life.
$224.00   BUY NOW

OGM LX LED Anchor Light

Orca Green Marine’s LX series uses the latest Luxeon LED technology available. A newly designed power regulation circuit allows OGM’s lights to operate from 8V to 36 V DC. Therefore, the LX series can be used on 12V, 24V, or 36VDC battery systems.

The OGM anchor light requires only one Luxeon LED! An optional photocell automatically turns on at dusk, off at daylight, allowing you to leave your boat at anchor for days. The low power draw can be replenished during the day with a small solar panel to charge your boat’s battery bank.

OGM LX series LED Anchor Light Specifications

Voltage Range: 8V to 36V D.C.

Anchor Light

Power Consumption: 3 Watts (0.25 Amp at 12V)
Waterproofness: 6+ feet saltwater, 1+ hours
Auto on/off: optional
Material: Delrin, cast acrylic
LED: one Luxeon white – true 50,000+ Hours, 62 Lumens
Hookup: 4 feet marine-grade 2-conductor, 20-gauge wire
Dimensions: 2.5 inches high, 2.7 inches diameter

OGM LXA Series LED Anchor Light $249.00 BUY NOW
OGM LXA-P Series LED Anchor Light 
(with photocell on/off) $259.00   BUY NOW

OGM LXTA TriColor/Anchor $439.00  BUY NOW

OGM LXTA-P TriColor/Anchor
(with photocell on/off) $439.00  BUY NOW
OGM LXTA-S TriColor/Anchor with Strobe $439.00  BUY NOW
OGM LXTA-SP TriColor/Anchor with Strobe and
(with photocell on/off) $449.00  BUY NOW
Mounting of OGM mast lights is simple with three 6-32 screw inserts in the base. Choose between two optional stainless steel mounting brackets available: one for the flat top of the mast, the other L-shaped for side-mount.

Rotary switch for OGM Tricolor/anchor – allows you to use two wires up the mast to operate anchor or tri-color, by changing the polarity of the wires.  $40  BUY NOW

Rotary Switch

Toggle switch for OGM Tricolor/anchor – allows you to use two wires up the mast to operate either the anchor or tri-color.  Install a new tri-color/anchor combination to replace your old anchor light without rewiring the mast.  $7  BUY NOW

Toggle Switch

OGM LX Mounting Bracket

Side Mount $40.00  BUY NOW            Top Mount  $40  BUY NOW

Side Mount Top Mount
Posted on

Dr. LED Anchor Light bulb replacement

15 MM bayonet with off-set pins, two electrical contacts, fits many anchor light housings, including Aqua Signal series 40, 41, 50, 55, Perco series 200, Hella series 2984 and 2386, and others.

0.1 amps. About 1/20th the energy of the original bulb.  This can be the most effective bulb replacement on the boat, since the anchor light can be on for many hours a day.

Certified by testing agency approved by USCG (documentation available) when used in Aqua Signal series 40 housing.  2 mile visibility.

Polar Star 40
Polar Star 40

 

$46

call (727) 943-0424