Archive for the ‘LED cabin lights’ Category

Bebi fluorescent replacement (Fautasi)

  Fausati Fautasi 18 LED Marine Boat & RV 12 Volt Strip Lights

Michael at Bebi writes the following:

We ALWAYS listen to our customers, and we always enjoy getting requests for making unique lights. When Bill in Malaysia contacted us with a request for an attractive light to replace the (broken) fluoresent lights on his cruising yacht, he very much caught our interest.

Fiji has many beautiful indiginous woods, and we chose to use dakua salusalu (Decussocarpus vitiensis) for it’s beauty. Since this light is hand-crafted by our employee’s from a renewable resource, each one is slightly different from another in its appearance but will still enhance the beauty of your yacht’s saloon.

As this light was to be a replacement for a fluoro fixture, we were challenged with the question of length. What we finally settled on was to make each unit 150mm in length, so they could replace into the space of a 12, 18 or 24 inch fixture, without having to build and stock multiple sizes. Having the 150mm (6″) length also made it a perfect interiour light for small ‘trailer-sailers’, who have to watch not just their power consumption, but whether the light will fit at all!

We also spent quite a bit of time considering if the unit should have a switch or not (relative, switches are expensive). What we decided was to produce a three varients; unswitched, toggle switched, and magnetically actuated switched units. The toggle switched units have a switched ‘hot pigtail’, so you can control multiple unswitched units from a single switched one, not only saving you a bit of money, but it makes ‘ganging’ the lights together easier (don’t worry, we have instructions with all of our lights, as well as in our ‘Hints and Suggestions’ web page!)

Knowing that Baskin-Robbins has 31 flavours for a reason, you may order your Fautasi lights in either Warm White, or Pure White, colours….

The ink wasn’t even dry on our design paper before we came up with a thought for the toggle switched Fautasi LED fluorescent light replacement. We added a three way switch and a small, yellow, indicator LED. You can now choose (on the toggle switch light only) between ‘light on’, ‘light off’, and ‘indicator’, so as you can find the light switch in the dark! The indicator LED only draws 0.005 amps, so it really won’t break the electrical budget!

As is usual for us, we tested one of the proto-types in the galley of our own boat (which we also live aboard on), a Downeaster 38, with a U-Shaped galley. Perfect!

Copyright 2009 © Bebi Electronics, Ltd.

*Yes, Fautasi is a Samoan word! During the production of our first units, we had them lined up on a picnic table at Waitui Marina, and the rows of lights looked just like the line of oarsman aboard a fautasi to my eye!

The Bebi Fausati light.  $42.50  BUY NOW 

Marine Beam Recessed Fixture G-4 LEDs

Very bright, very long life, very good value.  The Marine Beam “Hammer” is the best LED hammerbulb replacement available for the small, recessed lights.  Very little heat, and 2 year warranty.  We’ve found these to be very reliable, and they use about 1/10 the power of the bulb they replace.$35    

 MORE INFO     BUY NOW 

SensiBulb

SensiBulb

SensiBulb

Sensibulb LED Lights  

Sensibulb: Incandescent Warmth, LED  Economics

After sunset your house batteries get quite a workout. Unless you’re plugged into a dock, most of us become genuine cheapskates with the cabin lighting. After all, interior lighting causes a constant drain on your batteries, and they can get dangerously hot. A good skipper can’t help but be aware that his batteries are being used up literally before his eyes!

Sailor’s Solutions Sensibulb™ LED Lights are very easy on your batteries. In fact, these little units use about six to eight times fewer amp-hours than Halogens and Xenons and they don’t throw off all that uncomfortable heat.

Sailor’s Solutions believes that Halogen lighting is just plain dangerous and should be considered a fire hazard.

Up to now, if you wanted to use LEDs and enjoy the energy savings and low heat, you had to put up with lighting that just wasn’t bright enough and had a harsh blue tint. Overhead or dome lighting was impossible and reading under a narrow “spot” was a challenge.

The crew at Sailor’s Solutions set out to solve the technical challenges involved with making a 12-Volt DC light bulb replacement with the beneficial low energy usage of LEDs. It would need to produce light just as bright and dispersed as a real light bulb and function equally well in overhead or dome applications.

Sailor’s Solutions threw in dimmable too because it’s just such a luxury to be able to dim down a fixture when you want to.

With the help of several talented engineers and thermal engineering assistance from NASA’s SATOP program, the Sensibulb™ LED Lighting System was perfected. Featuring abundant soft white light in a dispersed pattern with very efficient energy usage, Sensibulb™ is a direct replacement for all of your 12VDC interior lightbulbs.

But that’s not all! Each Sensibulb has a dimmer circuit (optional) that allows you to tune in just the right amount of light for a comfortable dining or entertaining experience.

So turn on the cabin lights and adjust them as you prefer. Have a pleasant evening onboard and don’t worry about the batteries!

Sensibulb™ Specification:

  • Size: 1.00″ x 1.00″ x 5/8″
  • Weight: 0.3 oz (20g)
  • Typical Current Usage: 0.16 Amps(warm) – 0.2 Amps(cold)
  • Voltage Range: 10-32 Volts DC
  • Typical Operating Temperature: 140° F
  • Ultra Violet Emissions: 0.00
  SEN10W, Sensibulb LED Light  The Next Generation in LED cabin Lighting, Great for overhead lighting and all other cabin lighting applications! If you can change a lightbulb you can install a Sensibulb!
$39.95  BUY NOW
   

Bebi Cabin Lights

About Bebi

bebi-owlOwl Cockpit/”anchor” light (not USCG approved)  15LEDs  $32.50            MORE INFO     BUY NOW

 

 

 

bebi-rinorinoRinirino Reading Light  G4 base, halogen replacement, 12 LEDs   $32.50   MORE INFO    BUY NOW

 

 

 

bebi-kalokaloKalokalo Reading Light  G4 base, Halogen replacement,15 LEDs$32.50      MORE INFO    BUY NOW 

 

 

Michael at Bebi in Fiji writes: “Electrically, we use an integral linear current regulator to provide maximum light intensity without negatively impacting the life of the LED’s. We have had a light on ‘Shangri-La’ in continuous test for over 18 months without any sign of deterioration or discoloration in the lenses. It has been repeatedly subject to system voltages greater than 15 volts and as low as 11.5. The light has been subjected to tropical storms and the harsh radiation of the tropical sun.”

Bebi Cockpit Light

Michael at Bebi in Fiji writes:

“As with all of Bebi products, every Beka Marine and Off Grid Anchor and Cockpit LED light undergoes rigorous testing including a burn in period under a varying voltage levels. This final test and our conservative, but innovative, design makes us feel confident to offer a limited LIFETIME WARRANTY (our lifetime, not the product’s sales life!).

“Unlike the cheap rubbish produced for the automotive market with a  ‘marine’  label attached, the Beka, like all of our marine LED lights, is designed from the ground up for a lifetime of use in the harsh marine environment.

“Using a UPVC shell, our marine LED lights will withstand the direct tropical sunlight on your yacht for years. It is fully sealed to ensure a long life through even the worst of a typical Fijian  ’carwash’  rain squall. We even warrantee our light to a depth of 1 meter for 1 hour (it’s actually better than that, but if your cockpit is more than a meter underwater for an hour, you likely have more worries than an anchor light)!

“Electrically, the Beka anchor and cockpit light has an integral current regulator to ensure full output while maintaining a long life during the voltage ups and downs of the battery charging cycle.  Also available with custom cord length, no cord, or no cigarette plug (for less $).”

$42.50    BUY NOW

Bebi Beka Cockpit Light
Bebi Beka Cockpit Light

 

  • Number of LED’s………….
  • 18     
     
  • Input Voltage………………..
  • 11-16vdc at rated light output
     
  • Drop-Out Voltage………….
  • 7.5 volts
     
  • Input Current…………………
  • <0.100 amps (0.078 typical)
     
  • Light Output………………….
  • Output constant over input voltage range due to integral current regulator
     
  • Typical average > 10.5cd
  •  
  • Absolute minimum >5.6cd
  •  
     
  • Calculated Range……………
  • Minimum of 2 miles.
     
  • Vertical Cone Angle………….
  • 30 degrees
     
  • Water-resistant……………….
  • >1 hour submersion at 1 meter depth in 25 degrees Celsius sea water
     
  • Connection…………………….
  • Beka-250mm fully tinned wire pigtail leads
    Beka Kaukaua-5 meters (~16.5′) Belden fully tinned wire cable
     
  • Weight………………………….
  • Beka ~50 gm (2 US oz.)
    Beka Kaukaua ~150 gm (~5 US oz.)
     
  • Dimensions……………………
  • Height – 35mm (1-3/8″); Max Diameter – 46mm (1-13/16″)
    OD ‘Skirt’ – 41mm (1-11/32″); ID ‘Skirt’ – 34mm (1-5/16″)
     
  • Warranty……………………
  • LIFETIME!