Stecktronics LED lights

The products on this page are U.S. Coast Guard certified.

 (For less expensive navigation lights, please click here [once we get the page built] for non-USCG certified lights.)

 

Stecktronics Tri-Color and Anchor Lights

This new Stecktronics product is manufactured in the Florida Keys. All parts are precision cut on

LED tricolor, LED masyhead, LED anchor/tricolor, led nav light
Tri 40

an automated CNC router. The case material is marine grade polymer and the lens is 1/8″ polycarbonate. All fasteners are marine grade stainless and its watertight integrity is accomplished with 13 mechanically compressed O-rings and a waterproof cable grip.  Incredibly low current draw, only 100ma (0.1 amps) in the lower anchor light section. Current draw for the upper tri-light section is just 185ma (0.18 amps). This is approximately 1/10th the current draw of a traditional incandescent fixture.

One great feature of this light is that any part of it can be replaced, and that includes any of the LED wafers or control boards. In the unlikely event something goes wrong, Stecktronics believes that it is very important that their lights can be fixed, as opposed to a light that is a sealed unit.

Two-Wire vs Three-Wire:
If you already have three wires running up the mast and have separate switches for navigation and anchor lights, then a three-wire system will work for you.

If you only have two wires running up the mast and have an existing anchor light switch; then a two-wire system is what you need. An exclusive Stecktronics micro-controller will remember how many times you turned your existing anchor light switch on and off and turn on either the anchor light or the tri-color light. All this with no extra wiring. Your existing switch will do it all! Full switch count features and instructions are available in the documentation listed below.

Three Wire Version Tri-color/Anchor  DATA  $395    BUY NOW

Quick Reference Guide for the Three-Wire model

Two Wire Tri-color/Anchor  DATA   $419    BUY NOW

Quick Reference Guide for the Two-Wire model

Three Wire System Without Auto On/Off and Flashing Features

DATA   $355    BUY NOW

Specifications

100ma (0.1amp) draw for lower anchor light
185ma (0.18amp) draw for the tri-light
Operating voltage range 11.6 thru 16 volts
Measurements and Fittings
3-1/4″ Diameter x 8-7/8″ High (on a 1-1/2″ stem) (also available with Low Profile Base, no stem)
Custom stem heights up to 12″ available
Fits mounting bolt pattern of Aquasignal? Series 40 Tri-Color and Anchor lights

USCG APPOVED ANCHOR LIGHTS

USCG Certified! Manufactured entirely in Marathon, Florida. This is one tough long-lasting light.

LED anchor light
Stecktronics Anchor

Add a control wafer for On-At-Dusk–Off-At-Dawn control.

LED Anchor Light with On-At-Dusk – Off-At-Dawn Control Wafer  $160    BUY NOW

Basic LED Anchor Light Without the Control Wafer   $120  CALL

Specifications
100ma (0.1amp) draw
Operating voltage range 11.6 thru 16 volts
Measurements and Fittings
3-1/4″ Diameter x 4-5/8″ High (on a 1-1/2″ stem)(also available on low profile base, no stem)
Custom stem heights up to 12″ available ($6.00 )
Fits mounting bolt pattern of Aquasignal? Series 40 Tri-Color and Anchor lights
Leave a Reply